3D Vision Blog - Forum
https://3dvision-blog.com/forum/

Acer H5360 setup problems, please help
https://3dvision-blog.com/forum/viewtopic.php?f=27&t=1967
Page 1 of 1

Author:  wingyamuk [ 17 Jan 2012, 19:11 ]
Post subject:  Acer H5360 setup problems, please help

Hi guys,

I've just bought the 3D Vision Kit 2, GeForce 550Ti and Acer H5360 and encountered a number of problems at setup.

1) The projector was not recognized as a 3D display.
2) Can't set the display (the projector) to 120 Hz.
3) There is no DVI input on the projector, so what cable or adapter should I use?
4) Can't set the resolution to 1280 x 720, only at the native resolution of 1024 x 768 of the projector.

Can anyone help me to resolve these problems or give me some tips in the setup. Many many thanks.

GeForce Driver: 285.62, OS: windows vista 64 bit.

Author:  wingyamuk [ 17 Jan 2012, 20:23 ]
Post subject:  Re: Acer H5360 setup problems, please help

I was so stupid. Just use the HDMI cable and everything is fine. Setup successful :) Thanks.

Author:  Bloody [ 17 Jan 2012, 23:46 ]
Post subject:  Re: Acer H5360 setup problems, please help

Good that everything is working fine now :)

Page 1 of 1 All times are UTC + 2 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/