3D Vision Blog

A normal user's look into the world of 3D Stereo Technologies

3D Vision Blog header image 4

First Hands On Impressions from ViewSonic’s PJD6211 DLP Projector

September 3rd, 2009 · 27 Comments · Other S3D Tech

viewsonic-pjd6211-3d-1


ViewSonic’s PJD6211 DLP Projector is the most affordable new model coming form the company that can work at 120Hz refresh rate and thus is officially 3D Vision compatible, which is a great news to all the current and future owners of Nvidia’s shutter glasses. This projector has a native resolution of 1024×768 and can provide you with a much bigger screen (especially compare to the 22-inch 120Hz LCD displays) to play games on, watch movies or view pictures in stereoscopic 3D and it does it quite well. Today I’ve finally got the projector, installed it and did some quick tests with it to see how good is the implementation and support for 3D vision and of course the projector in overall…

The installation and usage of the projector is pretty simple, but of course there are some issues that need some attention and getting used to, but once you do that you should be Ok with the product. I started with trying to use a long cheap VGA cable and I had trouble with setting up 120Hz which kind of surprised me, but I believe that the problem was something with the cable, because after switching to the shorter one that comes with the device there were no problems. Of course I’ve used a DVI to DSUB converter, because the videocard had only DVI outputs (Nvidia GeForce GTX 275), but there were no problems using the analog lines of the DVI interface for that.


viewsonic-pjd6211-3d-2


So after quickly setting up the projector I went to the 3D Vision wizard to activate it with the projector, and here you need to select a generic CRT display in order to have things started. One thing that surprised me quite a bit was the fact that on the step, where you have to select which one of the two objects you see in each eye – triangle or hexagon figure, they were displayed just the opposite from what you should see. So I had to select hexagon where I actually saw a triangle for that eye and the opposite for the other to continue after this step, otherwise I just got the answers “wrong”, but after that there were nor problems with the 3D mode. Here I’ve tried the “3D invert” function, which supposedly had to invert the left and right frame contents, but it did not help… then again even activating or deactivating the “3D sync” option in the projector menu there was no visible difference and I could use without problems 120Hz with S3D in both modes. The documentation of the projector is not very detailed on these two options, but we’ll probably have to wait for a firmware update with some fixes and improvements, but as I said that is not a problem if you know about the issue and the workaround… ;)


viewsonic-pjd6211-3d-3


I started with some well known games that work good and look very nice on the 120Hz LCD displays to have something to compare them and the results you get on the projector. Tomb Raider Anniversary and Underworld do look very nice as expected and much more fun to play when you don’t have to look like “through a small windows” which is actually your 22″ monitor. Counter Strike Source for instance did look better than on LCD display, but not that much… the game just is not great on 3D Vision, but still… Batman – Arkham Asylum Demo also looked very good on the projector, but with Prototype I had some issues with the character starting to be visible double even with the glasses if I increased the depth level a bit more than the lowest setting, and with the lowest setting it was Ok.


viewsonic-pjd6211-3d-4


In other games like X-Blades that works very good on 120Hz LCD I had some strange issues, like the yellow and red coloring of some objects that you see on the picture, something that should not be present there. But then again that seemed to be some sort of weird bug, because later on I tried the game on another PC and there it was looking normal, without the strange colors problem, so who knows. Actually on that picture more interesting is the strange colored line of the bottom of the projected screen, as you probably guess it should not be there and it is not a part of the game’s visuals. I did notice this strange colored line appearing form time to time in different applications, so it is probably some sort of bug again, but it is definitely something that should not be there at all…

While setting up the projector I did notice that changing between the refresh rates does also bring some change in the brightness levels of the projected images. This is why I’ve decided to actually measure the brightness levels at 60Hz and 120Hz and got quite interesting results:
– sRGB mode: 60Hz – 457 lux, 120 Hz – 328 lux (~ 39% drop in brightness)
– PC mode: 60 Hz – 956 lux, 120 Hz – 461 lux (~ 107% drop in brightness)

So the higher the brightness level is in 60Hz mode, the more it drops when switching to 120Hz. Of course these results are measured in the center of a completely white projected image at 3 meter distance from the projector, and your results may differ in different conditions, but the change in brightness level in percents will probably remain pretty much the same in relation between 60 and 120 hertz modes. Visually the difference in sRGB mode (I prefer this one) is not that noticeable, but in PC mode it is much more apparent to the naked eye (when switching between the modes). However I did not find this to be an actual problem when playing in a dark room, probably it might be an issue if you try to play in S3D in s too lit up room, resulting in objects in darker areas not that clearly visible. Stay tuned for more things I find while testing the PJD6211 DLP Projector… ;)

For more information about ViewSonic PJD6211 DLP Projector…

→ 27 CommentsTags:··········

ViewSonic PJD6211, PJD6221 and PJD6381 Projectors and 3D Vision

August 11th, 2009 · 9 Comments · GeForce 3D Vision

viewsonic-pjd6211-3d-ready-projector


A lot of people were eagerly expecting the new 3D Vision-ready projectors from Viewsonic to become available on the market and to buy them to get really big Stereo 3D displays to play with, including myself. And now that the ViewSonic PJD6211, PJD6221 and PJD6381 3D-ready DLP projectors are already available on the market it seems that you better wait a bit more, before going for them especially if you wish to use them with your 3D Vision glasses. It seems that these projectors do have some problems working with 3D Vision and some people are having problems making them to work, although some suggest that setting the projector as a CRT display helps. It seems ViewSonic needs to release a new firmware update (according to Nvidia, but Viewsonic claims they need new drivers from Nvidia) to make the things work as they should and avoid any problems and this should probably happen by the end of September. And in those few weeks we might also see an new version of the 3D Vision drivers with even more improvements, one of which will probably be the addition of support for the new MPO image format for Stereo 3D pictures and of course more gaming profiles. So I’m just going to wait a bit more to see how things develop, instead of getting one of these new “3D Vision-ready” (or not yet ready) projectors now and I suggest you do the same if you are interested in them… ;)

For more information about the 3D-ready 120Hz projectors from Viewsonic…

→ 9 CommentsTags:···········

Availability of ViewSonic’s PJD6211, PJD6221 and PJD6381 3D Projectors

July 31st, 2009 · 2 Comments · GeForce 3D Vision

viewsonic-3d-ready-projectors


On June 15th ViewSonic has announced three new 3D-ready DLP projectors that are suitable solution to be combined with Nvidia’s GeForce 3D Vision shutter glasses instead of a 120 Hz LCD display or a compatible TV screen. The first two “normal” DLP projectors – PJD6211 and PJD6221 should’ve been available in July according to Viewsonic, but looking around for them in the last few days proved that they are still not on sale. And PJD6381 – also a 3D-ready, but an ultra short-throw DLP projector (unlike the other two cheaper models that are a normal-throw ones) should be available in August, again according to the official information from Viewsonic’s press release…


viewsonic-pjd6211-3d-ready-projector

But according to some new information I just got from Viewsonic (thanks to Twitter) the new 3D-compatible PJD6211 DLP projector will be available in 1-2 weeks (by the middle of August), the PJD6221 and PJD6381 will be available in late August. So if you are looking to get any of these new 3D-ready DLP projectors for your 3D Vision setup you should start preparing for it, because I’m really eager to get a Viewsonic PJD6211 to it try out and compare the big screen and smaller resolution (1024×768) with high resolution (1680×1050), but small in diagonal Samsung 2233RZ display (22-inch)…

Viewsonic PJD6211 – 1024×768 – $849 (middle of August)
Viewsonic PJD6221 – 1024×768, network management – $999 (end of August)
Viewsonic PJD6381 – 1024×768, short throw, network management – $1,249 (end of August)

For more information about the 3D-ready 120Hz projectors from Viewsonic…

→ 2 CommentsTags:···················