3D Vision Blog - Forum
http://3dvision-blog.com/forum/

need help getting 3d bluray working
http://3dvision-blog.com/forum/viewtopic.php?f=9&t=3205
Page 1 of 1

Author:  bluc [ 07 Jan 2014, 14:40 ]
Post subject:  need help getting 3d bluray working

Hey all have Asus VG278HE(actually have three of these connected) screen gtx 780ti and have it connected by div and optical cable. I am using arcsoft tmt5 software but all I get is a black screen and audio. I I turn off " always play 3d Blu-ray in 3d" option in arcsoft then try enable it after movie has started in avatar I get the error "your player has not detected a 3d display".
So in device manager my screens show up as generic pnp am I supposed to install a driver for these screens? Anyone have arcsoft total media theatre 5 working with this screen?
Have tried playing with refresh rates an changing to a hemi cable but no luck help much appreciated.

Author:  Bloody [ 07 Jan 2014, 14:50 ]
Post subject:  Re: need help getting 3d bluray working

Do you have a 3D Vision kit or only the monitors in 2D Surround, because these monitors do not have a built-in 3D Vision IR emitter?

Have you tried with other players such as PowerDVD or WinDVD?

Author:  bluc [ 08 Jan 2014, 01:11 ]
Post subject:  Re: need help getting 3d bluray working

Yes I have a 3d vision 2 kit. I dont have them in sorround at the moment(waiting for a longer dvi and a display port adapter) Have a trial of corel windvd it works fine. But I own tmt5 and would like to get it working.

Page 1 of 1 All times are UTC + 2 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/