|3D Vision Blog - Forum
|VESA Stereo Connector and Signal Standard
|Page 1 of 1|
|Author:||Bloody [ 16 Dec 2010, 22:45 ]|
|Post subject:||VESA Stereo Connector and Signal Standard|
This document is intended to establish standards for the physical connector and signals used to support stereoscopic
display hardware of the type using sequential display of left and right images, with hardware means of shuttering the
viewer’s eye such that each eye sees only the intended image. Common implementations include LC (liquid crystal)
shutter glasses, or similar systems relying on polarization of the images. In any case, the systems intended to be
covered by this standard require the use of a stereo synchronization signal which identifies by its state which of the
two images is currently being displayed. This standard provides a specification of the physical connector to be used
to provide this signal regardless of the physical location of this port within a computer system, and the specifications
for the signal itself.
The full document in PDF format is attached below...
|Page 1 of 1||All times are UTC + 2 hours|
|Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group