3D Vision Blog - Forum
http://3dvision-blog.com/forum/

Help .. Problem with 3dvision and H5360
http://3dvision-blog.com/forum/viewtopic.php?f=27&t=3125
Page 1 of 1

Author:  murnau [ 26 Nov 2013, 11:14 ]
Post subject:  Help .. Problem with 3dvision and H5360

Hi friends,
-I recently buy a 3dvision kit (glasses + emmeteur) + v331 nvidia drivers (gtx260 with DVI-A > VGA to VGA in VP)
1 st problem : When i connect only my VP to the PC with a VGA cable the projector doesnt recongnize as a H5360 i have analog display in nvidia panel and usb non plug an play diplay in window config.
I try to update the driver with the H5360 EDID override. Now in windows configuration display panel configuration H5360 is seen as H5360 so i set 1280*720 120 Hz.
But when i go back to nvidia configuration i still have analog display even after reboot.

The only way i found to run emetteur and glasses is to select in nvidia panel generic CRT set resolution to 1280*720 @ 120 HZ, But <when i run a video or a game in fullscreen glasses are working emmeteur go to bright green but i have this annoying message in red ( Warning attempt to run in a no stereocopic display ...). 3D don't work in windowed mode even with 1280*720 @ 120 Hz set.

Only one time i succeed to find H5360 in the nvidia panel but i din't know how. This time when i execute stereoscopic configuration everything went fine the configuration found the H5360 compatible VP but after square and triangle mode glasses and emmeteur goes on 1 sec and stop working with the same message : ( Warning attempt to run in a no stereocopic display ...) seems like nvidia forced the VP to go in 60 Hz mode (seen on VP display).

How have you done to make nvidia recognize H5360 and work 3dvision kit properly?

Thanks for your help

Author:  Bloody [ 26 Nov 2013, 14:08 ]
Post subject:  Re: Help .. Problem with 3dvision and H5360

You can try with a DVI to HDMI adapter or cable, this way the projector should be properly recognized.

Author:  murnau [ 27 Nov 2013, 10:39 ]
Post subject:  Re: Help .. Problem with 3dvision and H5360

Thanks for advice I will let you know. I have to buy one, mine is to short.

Author:  murnau [ 29 Nov 2013, 20:53 ]
Post subject:  Re: Help .. Problem with 3dvision and H5360

Recently buy a 20 meter hdmi cable everything works now but sometimes glasses are flashing i think it come from the beam light of the vp who is close to me. Cool now let s play

Page 1 of 1 All times are UTC + 2 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/