All times are UTC + 2 hours



Post new topic Reply to topic  [ 44 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next
Author Message
 Post subject: Re: 3D Projector EDID Override INF driver database
PostPosted: 04 Oct 2013, 19:20 

Joined:
04 Oct 2013, 19:08
Posts: 1
Hello 3d vision fanatics,

I recently purchased the optoma hd131xe. Great PJ so far. I tried using the acer h5360 edid file to get Nvidia 3d Vision running. It does allow the Nvidia software to recognize the PJ as the acer but the emitter will not sync properly.

I downloaded the monifo program and copied the optoma hd131xe info to a text file. I see the plug and play ID numbers in the raw data but how would I change these? I am guessing I would need the OTMxxxx numbers for the gt720?

Would anyone have those and know how I can mod the optoma raw data. Thanks.

(ok, can't attach a .txt so here it is cut/pasted.. the numbers I think are correct are in blue font)

Monitor
Model name............... Optoma 1080P
Manufacturer............. OTM
Plug and Play ID......... OTM0019
Serial number............ Qxxxxxxxx
Manufacture date......... 2013, ISO week 24
Filter driver............ None
-------------------------
EDID revision............ 1.3
Input signal type........ Digital
Color bit depth.......... Undefined
Display type............. RGB color
Screen size.............. 890 x 500 mm (40.2 in)
Power management......... Not supported
Extension blocs.......... 1 (CEA-EXT)
-------------------------
DDC/CI................... Not supported

Color characteristics
Default color space...... Non-sRGB
Display gamma............ 2.20
Red chromaticity......... Rx 0.640 - Ry 0.330
Green chromaticity....... Gx 0.300 - Gy 0.600
Blue chromaticity........ Bx 0.150 - By 0.060
White point (default).... Wx 0.313 - Wy 0.329
Additional descriptors... None

Timing characteristics
Horizontal scan range.... 26-95kHz
Vertical scan range...... 24-120Hz
Video bandwidth.......... 170MHz
CVT standard............. Not supported
GTF standard............. Not supported
Additional descriptors... None
Preferred timing......... Yes
Native/preferred timing.. 1920x1080p at 60Hz (16:9)
Modeline............... "1920x1080" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync

Standard timings supported
720 x 400p at 70Hz - IBM VGA
640 x 480p at 60Hz - IBM VGA
640 x 480p at 67Hz - Apple Mac II
640 x 480p at 72Hz - VESA
640 x 480p at 75Hz - VESA
800 x 600p at 56Hz - VESA
800 x 600p at 60Hz - VESA
800 x 600p at 72Hz - VESA
800 x 600p at 75Hz - VESA
832 x 624p at 75Hz - Apple Mac II
1024 x 768p at 60Hz - VESA
1024 x 768p at 70Hz - VESA
1024 x 768p at 75Hz - VESA
1280 x 1024p at 75Hz - VESA
1152 x 870p at 75Hz - Apple Mac II
1280 x 800p at 60Hz - VESA STD
1280 x 1024p at 60Hz - VESA STD
1600 x 1200p at 60Hz - VESA STD
1280 x 720p at 60Hz - VESA STD
1024 x 768p at 120Hz - VESA STD
1400 x 1050p at 60Hz - VESA STD
1280 x 720p at 120Hz - VESA STD
1440 x 900p at 60Hz - VESA STD

EIA/CEA-861 Information
Revision number.......... 3
IT underscan............. Supported
Basic audio.............. Supported
YCbCr 4:4:4.............. Supported
YCbCr 4:2:2.............. Supported
Native formats........... 1
Detailed timing #1....... 1366x768p at 60Hz
Modeline............... "1366x768" 85.500 1366 1436 1579 1792 768 771 774 798 +hsync +vsync
Detailed timing #2....... 1280x768p at 60Hz
Modeline............... "1280x768" 79.500 1280 1344 1472 1664 768 771 778 798 -hsync +vsync

CE video identifiers (VICs) - timing/formats supported
1920 x 1080p at 60Hz - HDTV (16:9, 1:1) [Native]
1280 x 720p at 60Hz - HDTV (16:9, 1:1)
1920 x 1080i at 60Hz - HDTV (16:9, 1:1)
720 x 480p at 60Hz - EDTV (16:9, 32:27)
1920 x 1080p at 24Hz - HDTV (16:9, 1:1)
720 x 576p at 50Hz - EDTV (16:9, 64:45)
1280 x 720p at 50Hz - HDTV (16:9, 1:1)
1920 x 1080i at 50Hz - HDTV (16:9, 1:1)
720 x 480p at 60Hz - EDTV (4:3, 8:9)
720 x 576p at 50Hz - EDTV (4:3, 16:15)
640 x 480p at 60Hz - Default (4:3, 1:1)
1920 x 1080p at 50Hz - HDTV (16:9, 1:1)
720 x 480i at 60Hz - Doublescan (16:9, 32:27)
720 x 576i at 50Hz - Doublescan (16:9, 64:45)
1920 x 1080p at 60Hz - HDTV (16:9, 1:1)
NB: NTSC refresh rate = (Hz*1000)/1001

CE audio data (formats supported)
LPCM 2-channel, 16/20/24 bit depths at 32/44/48/88/96 kHz

CE speaker allocation data
Channel configuration.... 4.0
Front left/right......... Yes
Front LFE................ No
Front center............. No
Rear left/right.......... Yes
Rear center.............. No
Front left/right center.. No
Rear left/right center... No
Rear LFE................. No

CE vendor specific data (VSDB)
IEEE registration number. 0x000C03
CEC physical address..... 1.0.0.0
Supports AI (ACP, ISRC).. No
Supports 48bpp........... No
Supports 36bpp........... Yes
Supports 30bpp........... Yes
Supports YCbCr 4:4:4..... Yes
Supports dual-link DVI... No
Maximum TMDS clock....... 200MHz
Video latency (p)........ -1ms
Audio latency (p)........ 31ms
Video latency (i)........ -1ms
Audio latency (i)........ 31ms
HDMI video capabilities.. Yes
EDID screen size......... No additional info
3D structures supported.. Frame packing, Top-and-bottom, Side-by-side w. horizontal sub-sampling
3D formats supported..... Mandatory formats plus some primary VICs
1920 x 1080p at 60Hz - HDTV (16:9, 1:1) [Native]
1280 x 720p at 60Hz - HDTV (16:9, 1:1)
1920 x 1080i at 60Hz - HDTV (16:9, 1:1)
1920 x 1080p at 24Hz - HDTV (16:9, 1:1)
720 x 576p at 50Hz - EDTV (16:9, 64:45)
NB: NTSC refresh rate = (Hz*1000)/1001
Data payload............. 030C0010003828E000100010C00401410037

Report information
Date generated........... 10/4/2013
Software revision........ 2.70.0.989
Data source.............. Real-time 0x0071
Operating system......... 6.1.7601.2.Service Pack 1

Raw data
00,FF,FF,FF,FF,FF,FF,00,3E,8D,19,00,9B,01,00,00,18,17,01,03,80,59,32,78,0A,EE,91,A3,54,4C,99,26,
0F,50,54,BF,EF,80,81,00,81,80,A9,40,81,C0,61,7C,90,40,81,FC,95,00,02,3A,80,18,71,38,2D,40,58,2C,
45,00,C4,8E,21,00,00,1E,00,00,00,FF,00,51,38,56,43,33,32,34,30,34,31,31,0A,20,00,00,00,FC,00,4F,
70,74,6F,6D,61,20,31,30,38,30,50,0A,00,00,00,FD,00,18,78,1A,5F,11,00,0A,20,20,20,20,20,20,01,7A,
02,03,2F,F1,4F,90,04,05,03,20,12,13,14,02,11,01,1F,07,16,10,23,09,1F,07,83,09,00,00,72,03,0C,00,
10,00,38,28,E0,00,10,00,10,C0,04,01,41,00,37,66,21,56,AA,51,00,1E,30,46,8F,33,00,00,00,00,00,00,
1F,0E,1F,00,80,51,00,1E,30,40,80,37,00,00,00,00,00,00,1D,00,00,00,00,00,00,00,00,00,00,00,00,00,
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,7E


 Profile  
 
 Post subject: Re: 3D Projector EDID Override INF driver database
PostPosted: 03 Nov 2013, 11:24 

Joined:
03 Nov 2013, 11:14
Posts: 1
Can some one post the .inf for a Benq 612 ST? Won't be able to setup 3d vision. It show's as Generic PnP monitor. Not as 3D DLP ready at the DLP status.
I have try'd a couple .inf files from this site but Power DVD won't detect a 3d ready monitor.
It worked fine for years but the last half year Nvidia won't detect the beamer.

Thanks.


 Profile  
 
 Post subject: Re: 3D Projector EDID Override INF driver database
PostPosted: 21 Nov 2013, 21:37 

Joined:
16 Jun 2010, 18:06
Posts: 5
Hi guys,

First I want to thank Bloody for a richly informative website on 3D, probably the best one on the net IMO, technically. I'm particularly impressed with the in depth reviews of all things 3D on the site. I'm surprised that the forum is not more active and have bookmarked to come here visit more frequently.

I've recently picked up a Benq W1070, but have been content with playing games in 1080 @24Hz. A little bit slow for some games. A kind fellow poster from Nvidia 3D Vision forum suggested I should check this EDID override on here a while back but haven't got around to it 'til now.

Any fellow here has done this with the Benq W1070 successfully? And could you please share the INF?
Cheers


 Profile  
 
 Post subject: Re: 3D Projector EDID Override INF driver database
PostPosted: 25 Nov 2013, 12:42 

Joined:
25 Nov 2013, 12:32
Posts: 1
Dear all

Does anyone have 1280x800 3D Projector INF, in the nvidia official suppot list, just like Panasonic PT-CW230 or NEC V300W or Canon LV-8235UST.

And upload on here.

thanks a lot

Best


 Profile  
 
 Post subject: Re: 3D Projector EDID Override INF driver database
PostPosted: 27 Nov 2013, 21:17 

Joined:
13 Nov 2013, 00:40
Posts: 6
Hi
Hi I tried the EDID override with the driver of the benq W700 - unfortunately win is saying it's missing a digital signature, wan anybody help??.

regards

Mike


Attachments:
benq MS500H.inf [3 KiB]
Downloaded 618 times
 Profile  
 
 Post subject: Re: 3D Projector EDID Override INF driver database
PostPosted: 28 Nov 2013, 00:09 
Site Admin
User avatar

Joined:
29 Apr 2010, 17:51
Posts: 3148
Location: Sofia, Bulgaria
Just install it anyway and if it does not allow you to install it you need to disable the Driver Signature Enforcement first.

For Windows 7 use F8 when booting and for Windows 8 the procedure is described here: http://3dvision-blog.com/tag/disable-driver-signature-enforcement-windows-8/


 Profile WWW  
 
 Post subject: Re: 3D Projector EDID Override INF driver database
PostPosted: 28 Nov 2013, 18:11 

Joined:
28 Nov 2013, 18:05
Posts: 1
Hi,

I have a NEC V260X projector which is DLP-3D capable but not 3D Vision certified. Does anyone have an EDID for the V300X (or V311X) which are certified. I believe the only major difference between them should be the nvidia certification and lumens. Otherwise, which one of the posted EDIDs is closer to the capabilities of the NEC? (it is a 4:3, 1024x768 native res projector)

One more question. Will the DLP glasses sync once the projector is spoofed as NVidia certified, or do you still need an IR blaster and nvidia glasses to sync with 3D vision?


 Profile  
 
 Post subject: Re: 3D Projector EDID Override INF driver database
PostPosted: 28 Nov 2013, 20:48 

Joined:
13 Nov 2013, 00:40
Posts: 6
Bloody wrote:
Just install it anyway and if it does not allow you to install it you need to disable the Driver Signature Enforcement first.

For Windows 7 use F8 when booting and for Windows 8 the procedure is described here: http://3dvision-blog.com/tag/disable-driver-signature-enforcement-windows-8/


... did it... now chatting with NVIDIA because my emitter is not responding... any suggestions Bloody?


 Profile  
 
 Post subject: Re: 3D Projector EDID Override INF driver database
PostPosted: 28 Nov 2013, 21:47 
Site Admin
User avatar

Joined:
29 Apr 2010, 17:51
Posts: 3148
Location: Sofia, Bulgaria
Uninstall the driver from the Device Manager and install the standard driver...


 Profile WWW  
 
 Post subject: Re: 3D Projector EDID Override INF driver database
PostPosted: 04 Dec 2013, 07:45 

Joined:
04 Dec 2013, 07:41
Posts: 1
Bloody wrote:
Acer H5360 3D DLP Projector


Many, many, many thanks!!! Best download of the year!

-Bear


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 44 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next

All times are UTC + 2 hours


Who is online

Registered users: Bing [Bot], Majestic-12 [Bot]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron