All times are UTC + 2 hours



Post new topic Reply to topic  [ 18 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Experimental Live 2d to 3d hardware configuration DEMO
PostPosted: 22 Jun 2018, 01:40 

Joined:
03 May 2010, 16:37
Posts: 40
2dto3d Free To Air TV Demo stream link. Save the link as a 2dto3ddemo.strm file and open in Kodi as a video file

OR Open this URL in Stereoscopic Player
2d to 3d DEMO stream link
deleted demo over

Best viewed on a 3dtv

The setup i've assembled with an assortment of 3d devices I've purchased from America and Asia and experimentally combined to make possibly the best on the fly 2d to 3d converter in the world very cheap relatively compared to any professional converter used by sports 3d channels which now are closed down. It basically uses a Digital Set top box HDMI out feeding in to a USA
3d-bee HDMI 2d to 3d converter ( Mode Sports +) uses 3d demultplexers that seperates left and right streams from the 3d-Bee where the right stream is fed in to a Chinese Lenkeng 2d to 3d converter (3d level 5) the 3d demultiplexed so the Lenkengs right eye is seperated and passed through a roland video frame delayer and combined again with the seperated left of the 3dbee with a HDMI Multiviewer in to Half Side by Side 3d HDMI signal which is then fed to my 3dtv switched in to H-SBS 3d mode. The Multiviewer isn't genlocked with input HDMI inputs.
The world coudn't bring live 3dtv to me so i brought live 3dtv to me. 3d will come back at some point this is sent as an historical record. I watch live tv in 3d most of the time and don't get headaches from it. It makes 3d content for free and also is unlimited 3d content for my home viewing. i have an 100" polarised dual 3d LED projector setup to view my on the fly conversion at home. Their is no delay between remote control of set top box and the TV or projectors. I have an LG 65" 4K 3dtv i watch it on most of the time.

Stereoscopic demultiplexers used are 3 hdfury4's set to either 1080p Left or Right output
Used Devices Links
http://www.3d-bee.com/diamond/

https://www.aliexpress.com/item/LKV223- ... 4c4dTgd8kw

https://www.aliexpress.com/item/VOXLINK ... 4c4dTgd8kw

3x hdfury4 replacements with 3dfury firmware installed
https://www.hdfury.com/product/hdfury-x4/


Last edited by pheggie on 28 Jun 2018, 13:47, edited 2 times in total.

 Profile  
 
 Post subject: Re: Experimental Live 2d to 3d hardware configuration DEMO
PostPosted: 22 Jun 2018, 12:28 

Joined:
03 May 2010, 16:37
Posts: 40
Now replaced the Lenkeng converter with a monoprice 2d to 3d converter in my setup which is obsolete seems to improve depth a bit. Now streaming.

EDIT. Had too many problems with Monoprice the Lenkeng works better so i put the Lenkeng converter back in the setup


 Profile  
 
 Post subject: Re: Experimental Live 2d to 3d hardware configuration DEMO
PostPosted: 23 Jun 2018, 06:41 

Joined:
03 May 2010, 16:37
Posts: 40
Found out low quality HDMI cables were causing monoprice converter to not work
I've replaced lenkeng converter in the setup with monoprice converter and been streaming now and today


 Profile  
 
 Post subject: Re: Experimental Live 2d to 3d hardware configuration DEMO
PostPosted: 24 Jun 2018, 07:06 

Joined:
03 May 2010, 16:37
Posts: 40
Now Streaming a Demo of a New setup consisting of a set top box hdmi out feeding in to the 3d-Bee 2d to 3d converter input whose output feeds in to a cheap Chinese hdmi video wall controller set to 2x1 acting as a stereoscopic demultiplexer outputing left and right HDMI signals. Left eye going to a HDMI Multiviewer Right eye going to Atlona 1080p scaler then Lenkeng 2d to 3d converter outputing in to hdmi input of Optoma 3d-XL set to Right eye output which feeds in to the HDMI Multiviewer to
combine in to a H-SBS HDMI output for 3dtv input

EDIT: Swapped the Lenkeng converter with a Monoprice 2d to 3d converter get more depth and pop out

Device Links
HDMI video wall controller
https://www.aliexpress.com/item/2x1-vid ... 4c4dFEfwBH


Last edited by pheggie on 25 Jun 2018, 11:14, edited 1 time in total.

 Profile  
 
 Post subject: Re: Experimental Live 2d to 3d hardware configuration DEMO
PostPosted: 25 Jun 2018, 04:21 

Joined:
03 May 2010, 16:37
Posts: 40
If you have tridef Download tridef 3d media player
shortcuts to play the 2dto3dHSBS demo stream

https://drive.google.com/open?id=1rn5rs ... aUE3f3mnro


 Profile  
 
 Post subject: Re: Experimental Live 2d to 3d hardware configuration DEMO
PostPosted: 27 Jun 2018, 06:54 

Joined:
03 May 2010, 16:37
Posts: 40
Swapped the Monoprice converter with a Lenkeng Converter in the setup in the latest live stream


 Profile  
 
 Post subject: Re: Experimental Live 2d to 3d hardware configuration DEMO
PostPosted: 29 Jun 2018, 01:10 

Joined:
03 May 2010, 16:37
Posts: 40
Basically added another Lenkeng converter to the right eye achieved more popouts

The results can be seen in this video

https://www.youtube.com/edit?video_id=NjamiysFpag


 Profile  
 
 Post subject: Re: Experimental Live 2d to 3d hardware configuration DEMO
PostPosted: 07 Jul 2018, 00:47 

Joined:
03 May 2010, 16:37
Posts: 40
Typical results with a Set Top Box feeding a 3dBee set to popout whose left eye passes through a Roland video frame delayer to realign time delay between left and right of HSBS HDMI video output while the first 3dbee right eye daisy chains right eye only through a second 3dbee set to Popout then a Monoprice set to default 2d to 3d (3dtv) then feeds in to a Lenkeng set to level 5 then the right and left eyes multiplexed in to HSBS HDMI output for 3dtv.

Slight Post Horizontal Shift added with Stereoscopic Player plus a 4 pixel crop left right top bottom.

Sample Clip

https://www.youtube.com/watch?v=Ul4xZbA7XVk


 Profile  
 
 Post subject: Re: Experimental Live 2d to 3d hardware configuration DEMO
PostPosted: 11 Jul 2018, 10:11 

Joined:
03 May 2010, 16:37
Posts: 40
New improved live 2dto3d FTA stream demo may need good internet demo not running all the time
H-SBS 3d 1080i 5800Mb/sec working in VLC

stream link
deleted demo over

Any feedback?


Last edited by pheggie on 08 Oct 2018, 04:35, edited 2 times in total.

 Profile  
 
 Post subject: Re: Experimental Live 2d to 3d hardware configuration DEMO
PostPosted: 13 Jul 2018, 22:00 

Joined:
03 May 2010, 16:37
Posts: 40
Men In Black 3 3D Trailer 2 in 3d
3d enhanced version
https://www.youtube.com/watch?v=cLHW-slljWU

Original footage version can be seen here

https://www.youtube.com/watch?v=rb8ahNwQPYQ



passed through my 2d to 3d converter acting as a real 3d source depth enhancer

adds popout with no ghosting or headaches induced while viewing.


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 18 posts ]  Go to page 1, 2  Next

All times are UTC + 2 hours


Who is online

Registered users: Bing [Bot]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron