All times are UTC + 2 hours



Post new topic Reply to topic  [ 1 post ] 
Author Message
 Post subject: In trouble with lenticular 3d printing
PostPosted: 04 Sep 2013, 13:27 

Joined:
06 Oct 2012, 09:25
Posts: 6
I bought some 75 LPI lenticular sheets, but I am not able to obtain acceptable results, both using laser and inkjet printers. Can actually laser printers be used for lenticular printing?

I printed dozens of pitch calibration test sheets; it looks my sheets are actually quite close to 75 LPI... but the 75 LPI strip does never become completely black or copletely white: instead, it is white for 2 cm, then black for 2cm, then white for 2cm and so on. All surrounding strips are even worse, being black/white bands more frequent and thinner.
What can it depend on?

Additionally, I cannot figure out how to determine which exactly is my printer resolution: manual says 600 DPI, but how can I verify if it is EXACTLY 600 DPI? Can actual resolution affect lenticular printing?

Does it exist any pitch calibration test sheet also carrying a "printer actual resolution estimation pattern"? Or a program which can create it?

Currently I'm using PitchTest for pitch calibration and StereoPhotoMaker to setup lenticular images.
Can I configure Windows Paint or Windows Image Viewer in such a way they print at actual image resolution? (i.e. 1 pixel = 1 dot).


 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC + 2 hours


Who is online

Registered users: Bing [Bot], Exabot [Bot]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: